To use the PassWall2路由器 tool effectively,follow these organized steps:

1. Install the Tool:

   • Download or obtain PassWall2 from the official provider or community packs.
   • Ensure you have the necessary network configuration software installed, such as a router or a management tool.

2. Set Up Network Configuration:

   • Connect the router to your network.
   • Create a default interface with the correct IP, MAC address, and default port.

3. Create a New Passive Wall:

   • Access the PassWall2 tool and select the option to create a new wall.
   • Follow the prompts to specify the devices (IP, MAC, and port) for the wall.

4. Configure Wall Configuration:

   • Set up required configuration, including ruleset (e.g., "block," "blockqueue").
   • Define traffic rules, such as blocking or queued traffic.

5. Add a Default Interface:

   Assign an interface number and configure rules or ruleset for routing.

6. Configure Ruleset:

   Use ruleset configurations like "queue" or "queuerules" to manage wall traffic.

7. Set Up Default Port:

   Specify the port for outgoing traffic.

8. Add Default Interface:

   Ensure another interface is configured for routing.

9. Configure Rules:

   Set up custom rules or use existing rulesets if needed.

10. Run the Wall:

    Save your configuration and run the router to test the wall's functionality.

11. Optional: Configure Ruleset Options:

    Explore complex rules or custom rulesets for advanced configurations.

12. Troubleshooting:

    If issues arise, check network setup, configuration errors, or tool documentation.

By following these steps, you can effectively set up and manage a passive wall using PassWall2, ensuring secure and efficient network routing.